We recently sent our affiliate, I Am Choi Boi, a pre-owned Scotty Cameron putter from Next Round. But instead of rolling with it straight out of the box, he took it to the next level—giving it a full-on makeover to restore it to its former glory.
Watching his transformation inspired us to dive deeper into what it takes to do your own Scotty Cameron putter restoration. Whether you’ve scored a vintage model or just want to refresh your gamer, here’s how to bring your putter back to life.
Step 1: Initial Cleaning & Paint Removal
Before you break out the polish, start with a thorough clean. A proper Scotty Cameron putter restoration begins with removing all the old paint and residue.
- Remove any lead tape, stickers, or loose paint fill with a razor blade or metal pick.
- Soak the head in acetone for about an hour to loosen old paint.
- Gently scrub the cavities and engravings using a wire brush or cotton swabs.
- Rinse with dish soap and water to eliminate any remaining debris.
Pro tip: The goal is to get the putter completely clean before sanding—any leftover residue can mess with your finish.
Step 2: Sanding for a Smooth Finish
This is where your Scotty Cameron putter restoration really starts to take shape. Sanding removes imperfections and restores the smooth, satin surface these putters are known for.
- Start with coarse-grit sandpaper (around 120 grit) to remove dents and scuffs.
- Progressively move to finer grits (220–400) for a polished, uniform surface.
- Use a sanding block to keep flat areas even and protect edges.
- For that professional touch, some golfers use a belt sander with a Scotch-Brite belt to blend minor imperfections.
If you want to replicate the factory finish, a light bead blast can create that soft, matte sheen found on many Scotty Camerons.
Step 3: Painting & Paint Fill
Now it’s time to add the signature flair back to your putter. Whether you’re restoring the classic cherry red dots or going bold with custom colors, precise application is key.
- Make sure the putter is completely dry after sanding.
- Use acrylic or specialty enamel paint designed for metal clubs.
- Apply paint carefully using a toothpick or fine applicator into engraved areas.
- Tilt the club slightly to help the paint self-level and fill evenly.
- Let dry for at least 2–3 hours, ideally 24 for best results.
Once dry, dip a Q-tip in acetone to clean any excess paint off the edges for that sharp, professional look.
Step 4: Final Polish & Protection
After the paint has cured, it’s time to make it shine. Apply a metal polish or Scotty Cameron finishing balm (if you have it) to bring out that mirror-like glow.
If your putter is carbon steel, finish it with a light oil or protective coating to prevent rust. Stainless steel models typically don’t need this step but will still benefit from a final buffing session.
Why We Love Scotty Cameron Putters
Scotty Camerons aren’t just status symbols—they’re precision instruments built for feel and consistency. That’s why a proper Scotty Cameron putter restoration is worth the effort. You’re not just refreshing a club; you’re reviving craftsmanship.
And if you’re looking to start your own project, you can often find used Scotty Cameron putters in amazing condition right here at Next Round—verified for authenticity and graded by condition.
